Subject: Reedy Zappers and RC8B4 and RC8B4e Parts. March 7, 2022

View this email online
(www.getresponse.com)

banner
Insider's Newsletter

March 7, 2022

NEW PRODUCTS

New! Parts for the RC8B4 and RC8B4e Team Kits

(Pictured: #80945 RC8B4 Team Kit, #80946 RC8B4e Team Kit.)

March 7, 2022
Reedy Zappers DR 6600mAh SQ-configuration batteries are in stock and ready to ship! The SQ, or "square" configuration was the brainchild of the Reedy engineering team as a superior alternative to saddle packs. While the design ran out of favor in the 1:10 off-road racing world, it shines in the drag racing world thanks to its low center of gravity and wide footprint, which provide excellent stability without sacrificing performance.
• April 2022. (Pictured: #80945 RC8B4 Team Kit, #80946 RC8B4e Team Kit.)

#WeAreAE click to learn more about the product

New! Reedy Zappers DR 6600mAh SQ Competition HV-LiPo Drag Battery

(Pictured: #27378 Zappers DR HV-LiPo 6600mAh 130C 7.6V SQ.)

February 24, 2022
Reedy Zappers DR 6600mAh SQ-configuration batteries are in stock and ready to ship! The SQ, or "square" configuration was the brainchild of the Reedy engineering team as a superior alternative to saddle packs. While the design ran out of favor in the 1:10 off-road racing world, it shines in the drag racing world thanks to its low center of gravity and wide footprint, which provide excellent stability without sacrificing performance.
• Available now. (Pictured: #27378 Zappers DR HV-LiPo 6600mAh 130C 7.6V SQ.)

#WeAreAE click to learn more about the product

VIDEOS RELEASED

March 1, 2022
Trail Tip Tuesday: Applying Decals
click to view

A-TEAM APPS TIPS


February 28, 2022
RC Glossary, Anti-roll bar, Sway Bar

Anti-roll bars are used to stabilize a vehicle from excessive chassis roll (such as when a buggy leans through the turns by centrifugal force).

On a high-traction surface, a vehicle not using anti-roll bars will tend to have a lot of chassis roll, which results in the vehicle being less responsive.

Adding anti-roll bars (or making them thicker if you already have them on) will help minimize the chassis roll, making the vehicle more responsive in cornering, and at the same time making it more stable.

Anti-roll bars can also help balance the pressure between the front and rear. If your car is oversteering, consider adding a front anti-roll bar only (or making the front bar thicker than the rear). If your car is understeering, consider adding a rear anti-roll bar only (or making the rear bar thicker than the front).

(See Other Helps > RC Glossary)

click to view

RACING NEWS

Check out our racing news on Facebook

Click for More

Use our A-Team Apps for tuning your car!

Click for More

ANNOUNCEMENT

Back In Stock! Pro2 SC10 Method Race Wheels RTR and LiPo Combo

(Pictured: #70021 Pro2 SC10 Method Race Wheels RTR.)

March 1, 2022
Team Associated's Pro2 SC10 Method Race Wheels is a Ready-To-Run RC electric truck based on the 10-time R.O.A.R. winning Short Course National Champion. The Pro2 SC10 includes a water-resistant, high-power Reedy brushless speed control, Reedy 3300kV brushless motor, and a water-resistant, enclosed receiver box. The suspension includes adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox comes with a heavy-duty sealed-gear differential and the externally adjustable V2 slipper clutch. CVA driveshafts are included. The short course hex-drive wheels come standard on the Pro2 SC10 with realistic off-road wheels and tires to keep the truck gripping the ground.
• Available now. (Pictured: #70021 Pro2 SC10 Method Race Wheels RTR.)

#WeAreAEclick to learn more

PREVIOUS NEWS

February 24, 2022
Apex Challenge


February 24, 2022
Website Updates

February 7, 2022
New! DR10 Metal Gear Conversion


February 7, 2022
New! Apex2 Hoonitruck RTR and LiPo Combo

Get All The News

ABOUT YOUR SUBSCRIPTION


• We do not send unsolicited newsletters.
 • See information at bottom to unsubscribe.
 • Hit Reply to talk to us.
 • Team Associated Privacy Policy.
 • About Team Associated.
 • Exchange Program.
 • Team Associated does 3D printed parts!

Please add these addresses to your Safe Sender list or Junk mail controls so future emails don't end up outside your inbox:
  newsletter@associatedelectrics.com
  newsletter-associatedelectrics-com@getresponse-mail.com

Associated Electrics, Inc.
21062 Bake Parkway
Lake Forest, CA 92630
(949) 544-7500