Subject: Materials Analysis and the Environment

FEBRUARY 2023, ISSUE 115

WELCOME

Introduction

RIGAKU JOURNAL

Rigaku Journal

WINTER 2023, VOLUME 39, NO. 1

X-ray diffraction measurement of layered manganese dioxide that can store/release heat repeatedly by desorbing/absorbing water molecules to/from moist air

Norihiko L. Okamoto, Takuya Hatakeyama, Hongyi Li and Tetsu Ichitsubo


We have discovered that layered manganese dioxide (birnessite, δ-MnO₂) can store/release heat through an intercalation mechanism in which water molecules in a moist atmosphere are deintercalated/intercalated between the layers. The material has been found to have an excellent balance...

Read more >


Structure Analysis of Nano-Size Crystals by the XtaLAB Synergy-ED: An Integrated Platform for 3D ED/MicroED
Sho Ito and Akihito Yamano


3D ED/microED has been attracting much attention because it enables structure analysis of crystals smaller than 1 μm. In this article, examples of crystal structure analysis and some applications of MicroED/3D ED will be presented.

Read more >


3D molecular visualization of a human antibody by MAXS measurement reveals significant differences between the solution and crystalline states

Takashi Matsumoto, Akihito Yamano, and Takashi Sato


X-ray solution scattering experiments have been utilized to analyze structures and conformational changes of biological macromolecules. Those experiments employ X-ray scattering data in a small-angle region, a technique called Small Angle X-ray Scattering (SAXS). SAXS experiments often focus on the macroscopic shapes and sizes of molecules.

Read more >


Atomic-scale structural analysis by total scattering profiles

Masatsugu Yoshimoto*


In the past, total scattering data was used to obtain the pair distribution function (PDF) G(r). However, it has become clear that it is also possible to calculate characteristic values related to the physical properties of materials from the total scattering data. In this paper, we introduce two applications using...

Read more >


X-ray fluorescence analysis of liquid samples without helium gas

Yuri Maruko


Helium gas is becoming more difficult to obtain these days due to decreased supply and increased demand. In X-ray fluorescence analysis, helium gas is often used in the analysis of liquid samples, while processing samples as solids is possible under a vacuum. In this article we introduce two liquid sample...

Read more >


Basics of X-ray CT reconstruction--Principles and applications of iterative reconstruction

Takumi Ohta


This article describes the principles and applications of iterative reconstruction in X-ray computed tomography. We use several real examples to show how iterative reconstruction can produce higher-quality reconstructed images than the conventional reconstruction method. This article describes the principles and applications of iterative reconstruction (IR) methods.

Read more >


NEX CG II Advanced Cartesian Geometry EDXRF


NEX CG II is a multi-element, multi-purpose energy dispersive X-ray fluorescence (EDXRF) spectrometer that performs rapid qualitative and quantitative trace elemental analyses and addresses needs across many industries. This next-generation, high-end spectrometer is ideal for trace heavy metal and halogen analysis, which is in increasing demand for several sectors.

Read more >


Vullios - Updated Software Wrapped in a Newly Designed Interface- Thermal Analysis Measurement and Analysis Software


Measurement and analysis software is the crucial interface between the user and an analyzer. Its ease of operation affects how efficiently users achieve their goals. In pursuit of better usability and improved functionality, Rigaku has developed a new measurement and analysis program called “Vullios.”

Read more >


MILabs, All-in-one Imaging Platform for Preclinical Applications- VECTor*/U-PET/U-SPECT/U-OI/U-CT


MILabs B.V. (Headquarters: The Netherlands, hereinafter MILabs), which joined the Rigaku Group in August 2021, is a leading global manufacturer of preclinical imaging systems. Preclinical research, as the name suggests, is a crucial step in the drug discovery process that usually uses mice and rats in advance of clinical trials...

Read more >

UPCOMING EVENTS

Rigaku will be exhibiting at FORUM LABO on March 28-30, 2023 at Paris Expo Porte de Versailles.


Visit stand B72 to discover the Rigaku range of equipment and, half a century after the release of the first Rigaku MiniFlex tabletop diffractometer, our latest innovations!

 

We look forward to discussing (over coffee or tea) your projects and the solutions that can be provided by Rigaku equipment.

If you are going to be at Pittcon, our friendly staff will be on hand at stands 1806 and 1807 to talk all things X-ray analysis and imaging.

 

We will have on show the Supermini200 benchtop WDXRF as well as the NEX CG II and NEX QC EDXRF spectrometers, complemented by the MiniFlex benchtop XRD, which is celebrating its 50th anniversary.

 

We look forward to seeing you Philly!

WEBINARS 

XRF ANALYTICAL CONSIDERATIONS FOR FUSION METHODS

The Webinar will focus on various applications used to test the quality of a wide range of materials. The most important is the sample preparation of the various types of materials to obtain accurate and precise results.

The analysis of powders by XRF the sample inhomogeneity due to segregation, grain size, mineralogical effects influence the intensity and cause errors. Fusion is a benefit in that the matrix and mineralogy is destroyed. The fusion method means the laboratory only require one calibration method for the analysis of a wide range of elements. The analytical considerations are discussed when setting up the analytical method.


Date/time

Wednesday, Mar 15, 2023 09:00 AM CET
Wednesday, Mar 15, 2023 04:00 PM CET

Register >

DETERMINATION OF ELEMENT CONCENTRATIONS IN PETROCHEMICAL, BIODIESEL SAMPLES USING XRF METHOD

X-ray fluorescence analysis (XRF) is one of the most important instrumental analytical methods of our time. It can be used to analyze element concentrations in the range of a few ppm up to 100% reliably and quickly.


Compared to other techniques, XRF saves time not only on sample preparation but also on the calibration. This makes XRF a super-powerful technique that should not be overlooked in any process and quality laboratory.


During the webinar, super-easy sample preparation—including the solidification method and the powerful universal calibration—will be presented. Using examples from the field, it will be shown how elemental contents can be determined quickly and precisely using XRF with minimal effort.


Date/time

Thursday, March 23, 2023, 09:00 AM CET
Thursday, March 23, 2023, 04:00 PM CET

Register >

RIGAKU LAB TOUR DURING DGK

The annual meeting of the DGK will take place in Frankfurt from March 28 to 30, 2023–a stone’s throw away of RESE’s state-of-the-art laboratories in Neu-Isenburg–giving you the perfect opportunity to experience Rigaku’s products and scientists on site and in effect.

Join us in an exclusive all-access lab tour and watch up close as our application scientists present powerful analytical and diagnostic instruments and solutions. Transportation is provided.

Register now for your limited spot!

RIGAKU NEWS

January 20, 2023  Rigaku Analytical Devices is pleased to announce a renewed partnership with the University of Rome Tor Vergata, in collaboration with our local representative, ABCS Srl.  The program, known as CBRN Gate, provides education, training, and research activities related to global safety and security, in which Rigaku’s handheld Raman analyzer product line is used  for the identification of potential chemical threats.  CBRN Gate is part of their International Master Course titled “Protection Against Chemical, Biological, Radiological, Nuclear and explosive (CBRNe) Events,” and is property of the Health Safety Environmental Research Association of Rome (HESAR) Association. HESAR’s focus is to increase environmental protection and public safety and security, as well as improving the quality of life, workplaces, and the ecological system. 

February 14, 2023 Rigaku Europe SE announces the launch of direct sales for its XRD and CT business in the UK, enabling customers to purchase directly from the company. This new initiative will provide customers with the convenience of purchasing XRD and CT products directly from Rigaku Europe SE, allowing for a better understanding of customer needs and requirements. "We are delighted to launch direct sales in the UK and bring our high-quality XRD and CT products directly to customers," said Dr. Michael Hipper, Managing Director, Rigaku Europe SE. "This new initiative represents our commitment to providing the best possible customer experience and ensuring that our products are accessible to everyone."


With this new direct sales channel, customers will have access to state-of the art instruments through the local representative Omar Matar, Regional Sales Manager UK, Rigaku Europe SE. Matar will now manage the direct sales and support of the XRD and CT business in the UK.

FEATURED APPLICATION NOTES

Electroless Nickel Plating 

Applied Rigaku Technologies


Electroless nickel plating (EN) deposits a nickel-phosphorus or nickel-boron coating, providing an even, protective coating on metal or plastic materials for wear, corrosion resistance, or cosmetic enhancement. Measurement and control of the elements in the plating bath and deposited coating are important for optimum product quality. To meet this industry need, Applied Rigaku Technologies offers the NEX DE VS benchtop EDXRF system. Easy to operate at-line or in the lab, the NEX DE VS uses a special fundamental parameters application method that automatically calculates the plated coating thickness and composition and measures liquids using simple empirical calibration. NEX DE VS automatic switching collimators also offer small spot measurements down to 1 mm spot size for measuring plating on smaller pieces.
Read More >

Twist width evaluation of group III-V nitride films by rocking curve measurement

Rigaku Corporation


Deep ultraviolet LEDs are preferable for wide use as an alternative to mercury lamps since they are ultraviolet sources with low environmental impact. In recent years, their sterilization function has been especially attracting great attention, and practical application of this function is expected soon. In order to increase light emission efficiency and carrier lifetime, the quality of the AlN layer, which is the base for the active layer, must be improved. In this measurement example, an appropriate evaluation method was examined for the crystal orientation distribution (twist width) in the in-plane direction, which is used as an indicator of the threading edge dislocation density of the AlN layer.

Read more >

Lead Analysis in Gasoline — ASTM D5059-21 — Using WDXRF ZSX Primus IVi

Rigaku Corporation


Lead (Pb), in the form of alkyl lead such as tetraethyl lead, used to be added to gasoline as an antiknock additive to increase the octane rating. However, alkyl lead is highly poisonous. Gasoline with alkyl lead, called leaded gasoline, causes air pollution. Although lead-free gasoline, called unleaded gasoline, is common in most countries, lead occurs as a contaminant—either unintentionally or intentionally—in some countries. Therefore, it is necessary to check the lead concentration in gasoline. This application note demonstrates quantitative analysis of low concentration lead in gasoline according to ASTM D5059-21 on Rigaku ZSX Primus IVi, a wavelength dispersive X-ray fluorescence (WDXRF) spectrometer.

Read more >

© 2023 – Rigaku Corporation and its Global Subsidiaries. All Rights Reserved.