Subject: Flightcell Service Bulletin FSB-44

Service Bulletin
FSB-44 (V1)

Firmware Upgrade

To: End Users, OEMs, Distributors, Resellers, Service Centres, and Installers

Date: 02 December 2019

Affected Product/s: Flightcell DZMx, all product variants running platform 3 (v3.x.x) firmware

Affected Serial Numbers: Any serial numbers with above firmware

Status: Optional
Purpose
This bulletin provides information on Flightcell DZMx firmware release version 3.4.0.

Reason
This firmware provides new features, enhancements to existing features and bug fixes.

Prerequisites
To upgrade to this version of firmware, the DZMx must be operating a firmware version that begins with a '3' (e.g. version 3.x.x).

Change Summary
·         Support for Kawak fire tank
·         PTT - Faster update of talk group lists
·         Implemented support for AIS marine vessel location system
·         Suspend/resume periodic tracking via SBD message
·         Updated Iridium Service Center options
·         Corrected issue with incorrect flight state on start-up
·         Corrected issue with load manager reports
·         Corrected issue with Agriculture application job number and totals

Warranty Information
This firmware is available to all Flightcell DZMx users free of charge even if the unit is out of warranty. For product registration and warranty information please visit www.flightcell.com/warranty.

Labour Requirement
The duration of the upgrade will vary and is dependent on the previous firmware version installed. It will take between 5 to 40 minutes to complete. Power must be maintained to the DZMx at all times.

Equipment Required
Using DZMx USB port upgrade method:
  • USB port connection to the DZMx; and a
  • USB memory stick
Using DZMx Connect upgrade method:
  • A working Ethernet port on a PC or laptop; and a
  • Data connection via Ethernet to the DZMx
Modification Procedure
Before commencing the upgrade:
  1. Check the current DZMx firmware by going to MENU>Diagnotics Menu>About DZMx. This should be firmware platform 3.x.x. If the current firmware version is 2.x.x or 1.x.x, please contact the Flightcell technical support team - phone: +64 3 535 8651 or email: tech@flightcell.com.
  2. If using the USB upgrade method, download the firmware directly from: http://www.flightcell.com/support/firmware and save it to a USB memory stick.
  3. If using the DZMx Connect upgrade method, ensure your PC/laptop has access to the internet.
  4. Ensure there is enough battery power to run the DZMx for at least 1 hour (DZMx draws approximately 1A at 28VDC).
To perform the upgrade:
Using the DZMx USB port:
  1. Insert the USB memory stick into the DZMx USB port.
  2. Go to MENU>Hardware Config and press ENTER.
  3. If necessary, enable the DZMx extended menus using Installer Menu Enable, enter the installer password, then press ENTER.
  4. Scroll down to Firmware Upgrade and press ENTER.
  5. The upgrade will commence.
  6. Follow the prompts on the DZMx display.
Using DZMx Connect:
  1. Using an Ethernet cable, connect a laptop or PC to the DZMx Ethernet port.
  2. Open an internet browser and in the address/URL/location bar, enter the IP address: 192.168.4.1.
  3. Discover the DZMx and Login as an installer using the installer password.
  4. Navigate to the About section and under Version Information select Download Latest (will be displayed alongside the current firmware version if a later version exists).
  5. Save the firmware file to the hard drive.
  6. Select Upgrade and browse to the saved firmware file.
  7. Select Upload and wait for the firmware file to upload to the DZMx. Once the file has been fully uploaded the upgrade process will start automatically.
  8. After being redirected to the Discovery area, wait for the DZMx to fully reboot before re- discovering it. The display and keyboard may alternatively flash on and off during this period.
  9. Login as an installer using the installer password.
  10. Navigate to About and check that the new firmware version is displayed.
Click here to view and download a PDF version of this bulletin. Please reply to this email if you have any questions.

Flightcell International
98 Vickerman Street, Nelson, NZ
Phone: +64 3 545 8651
98 Vickerman Street, 7010, Nelson, New Zealand
You may unsubscribe or change your contact details at any time.

    This is an online snapshot of a newsletter created by the owner of Flightcell (Flightcell International, 98 Vickerman Street, 7010 Nelson, New Zealand) and sent via GetResponse on 2019-12-05. Report abuse